34
When an alarm occurs in a zone programmed for
silent or invisible alarms, audible warnings do not
sound and LCD messages do NOT display, but the
alarm is still reported to the central station.
Silencing Alarms
Refer to page 33 for additional details on what to do when an alarm sounds.
Alarm Speaker Sound Bell Sound
FIRE Rapid high-low siren sound. Each high-low
sound lasts approximately 1/2 second.
1 sec. on, 1 sec. off.
INTRUSION (Burglary) Loud whoop sound; 3 whoops per second. Steady.
EMERGENCY (Non-Medical) Slow, high-low siren sound. Each sound lasts
about 6 seconds.
*None
AUXILIARY Low-high siren sound. *None
* Note: Contact your installing company to program bell sounds.
To silence any alarm: To reset an alarm:
Single-Area Systems
Press
MUTE
+ code.
Enter your code.
Multi-Area Systems
Press
MUTE
+ code.
Enter your code, then press
.
To Next Page
Loading...
Need help?
General
