30 StorageSync User’s Guide
StorageSync Default Settings
StorageSync is ready to use as soon as you install it. However, you may want to change some
of the default settings before you backup, restore, and synchronize data.
Table 4 shows the StorageSync parameters and their default settings. Note that some of these
settings require the Professional Edition. For more information about these settings, see
Appendix A. For information about upgrading to the Professional Edition, see Appendix B.
Table 3. StorageSync Settings
Parameter Settings
Compression Type
No compression (default)
Compress to single archive
Compress to multiple archives
(requires upgrade to Professional Edition)
Compression Quality
Low (requires upgrade to Professional Edition)
Use Encryption
Disabled (requires upgrade to Professional Edition)
File Revision
Disabled (requires upgrade to Professional Edition)
Restore Options
Replace all files without confirmation (default)
Replace only old files
Auto-Launch
Disabled (default)
Enabled
Reminder
Disabled
Auto-Save Features
Save Log File Enabled (default)
Media Profiler: Enabled (default)
Use Exception List
Disabled, with no entries in the list
Main Window Size
800 x 600 pixels (default)
1024 x 768 pixels
Load StorageSync in Startups
Enabled on the System tray menu
Auto-Open Backup Window
Enabled on the System tray menu
To Next Page
Loading...