Simplex 4100+ User Manual

29
SECTION 6
NETWORK INTERFACE
INTRODUCTION
The Network Interface Option allows the 4100/4100+ to communicate with other FA panels or with a 2120 Multiplex
System (see Network Concepts [NET-91-500]).
NOTE: The 4100/4100+ acts as a transponder when connected to a 2120.
NETWORK (OR 2120) OPERATION DURING Walk Test

Status changes occurring as a result of a Walk Test

operation in a networked system are not communicated to
other members of the network (or a 2120). The Walk Test

is strictly a local 4100/4100+ operation. See Section 10
for Walk Test

procedures.
firealarmresources.com

Simplex 4100+ Specifications

General

Type	Addressable Fire Alarm Control Panel
SLC Loops	Up to 10
Operating Temperature	32°F to 120°F (0°C to 49°C)
Humidity Range	10% to 93% non-condensing
Display	LCD
Communication	Ethernet
Power Supply	120/240 VAC, 50/60 Hz
Battery Backup	24 VDC
NAC Outputs	Expandable
Releasing Capability	Yes, with releasing modules
Max Notification Appliance Circuits (NACs)	Varies by modules
Max Releasing Circuits	10
Communication Ports	Ethernet
Max Devices	3, 000