To Next Page

To Previous Page

14-03-2005

Chapter 6-10 Pilot menu & navigation examples

6.5 ETA & AVN display

Call up the menu bar, and...

4,4

load the ETA & AVN display

-to receive any data will require that navigation mode is active.

ETA - Estimated Time of Arrival - refers to the inserted local time,

and can be calculated to any point used for navigation.

AVN - Approximate Velocity Necessary - is automatically calculated

in knots after you key in the planned arrival time and date.

In route navigation the approaching point and present speed over

ground (AUTO) is automatically used for the calculation.

You can change to any waypoint in the route and also insert an alter-

native ETA speed (MANUAL).

ADJ

Open for change - in route navigation the approaching point is auto-

matically suggested and present speed is used for calculation.

If required - go to, and...

0-9

Insert alternative routepoint - only in Route navigation.

Go to ETA mode, and...

+/-

Select AUTO or MANUAL

Simrad CX34 User Manual

Questions and Answers: