To Next Page

To Previous Page

Fundamentals & initial start-up Chapter 2-9

course and speed figures - see section 6.3 Position display.

Do not start radar transmission before the antenna is warmed up, refer

to section 3.2.3 Start transmission.

Select display language:

Call up the menu bar, and...

7,1

press [7], [1] to call up the language display

Press up on the cursor to go to the bottom line in the display

+/-

Select language

ENT

Confirm entry

2.8 Turn power on

Starting up for the first time, or after loading a new software, or

after a master reset - see section 2.7. Starting up at any other time:

PWR

To turn on the CX34/44/54, press and hold the [PWR] key until you

have a picture on the screen

ENT

Press [ENT] when the system is ready

2.9 Turn power off

PWR

Call up INFO window, and...

PWR

Press and hold until the curtains begin to close

The CX34/44/54 is now turned off. All the data and setups are saved

and stored in the internal memory and, of course, will be available

next time the unit is turned on.

CX34/44/54 Operator manual

Simrad CX34 User Manual

Questions and Answers: