Chapter 7-2 Miscellaneous menu
ADJ
Load Setup for Wind display
Setup for Wind:
Damping level: MEDIUM
Apparent wind scale: NORMAL
Wind angle offset: 000°
Show wind speed as: APPARENT
Wind speed unit: METERS/SECOND
Go to the function you wish to change
+/-
Toggle between settings, or...
0-9
Key in new figure
ENT
Confirm entry and return to Wind display
Damping level - can be set to LOW, MEDIUM or HIGH. The higher
level the more steady and slow reacting reading.
Apparent wind scale - can either be set to NORMAL (0-180°) or
MAGNIFIED (0-60°).
Wind angle offset - can be from 0 to 360°.
Show wind speed as - APPARENT or TRUE.
Wind speed unit - can be either METER/SECOND, KNOTS,
KILOMETERS/HOUR or MILES/HOUR.
CX34/44/54 Operator manual
To Next Page
Loading...
Need help?
General
