EQ42/50/52 Fundamentals & initial start-up Chapter 2
12
call forward, or use the cursor key to highlight the function and press
[ENT].
If you want to switch to a different menu, use the cursor key to move to
the adjacent menu.
The menu bar will disappear from the screen at the selection of a
function, or by pressing the
[MENU] key. Besides, if not used, it
automatically turns off after 30 seconds.
2.4 Menu layout
_1_
POS
_2_
NAV
_1_ Position _1_Highway
_3_
ECHO
_4_
MISC
- 5 -
SETUP
_1_Echo50kHz _1_ DSC alarm _1_ Speed alarm, units & language
_2_ Echo 200kHz _2_ NMEA interface
_3_ Bottom expansion 50kHz _3_ Alarm output
_4_ Bottom expansion 200kHz _4_ Decca lanes
_5_ VRM expansion 50kHz _5_LoranC
_6_ VRM expansion 200kHz _6_ Display color
_7_ Depth & temperature diagram _7_ Factory settings
_8_ Echosounder setup
Most functions in the menus are general, and can be called forward at
any time, but a few are related to a certain menu(s) and can only be
called forward or activated in the appropriate menu. Inactive functions
in the menu will have a different color from the rest of the functions.
When selecting a sub-menu in the SETUP menu, the display will
To Next Page
Loading...
Need help?
General
