EQ42/50/52 SETUP menu Chapter 7
39
Alphanumeric names:
First select the key with the desired letter, then you can either repeat
the keystrokes, which will toggle between e.g. A, B, C, 1, or once you
have selected one letter you can go back and forth in the alphabet by
means of the +/- keys. Use the cursor key to go to next space or to go
back one space if you make a mistake.
Depending on the selected language the 0 (zero) key will hold special
characters e.g. ÆØÅÄÖÜÑ, and the 9 key will hold:
(empty space) .-
Press the
[CLR]
key to delete the character at the cursor position +
everything to the right of the cursor.
7.7 Factory settings
It will be possible to erase all sounder settings entered into the unit by
the user, and return to the sounder presets set up from the factory.
If the unit is still “alive” but has ceased to respond to normal operation,
it could become necessary to return to ALL factory presets – but first
check “Troubleshooting” in section 9.10.
) Activating the “Return to all factory presets” will erase all settings
including user data, and restore the basic settings from the factory.
MENU
Call up the menu bar, and…
5,7
press [5] and [7] to activate the ‘Factory presets’ display
Factory presets:
1
Return to NMEA presets.
2
Return to SOUNDER presets.
CLR
Return to all factory presets.
0
Show test display
MENU
Exit
To Next Page
Loading...
Need help?
General
