Simrad EQ42 User Manual

EQ42/50/52 SETUP menu Chapter 7
34
Interface setup: INPUT
Port: NMEA1 – NMEA0183. NMEA2 – NMEA0183
Sentence String Status NMEA
Water data:
Water temperature: MTW OFF 1
Water speed: VHW OFF 1
Heading data:
Heading: VHW ON 2
Position data:
Position: GLL ON 2
Course: VTG ON 2
Speed: VTG ON 2
Navigation data:
Navigation (APB, RMB and XTE): ON 2
MENU
Exit Accept
ENT
NMEA input settings:
MTW
VHW
GLL
RMA
RMC
GGA
VTG
Water temperature
Water speed heading
Geographic position, latitude/longitude
Recommended minimum specific Loran C data
Recommended minimum specific GPS data
Global Positioning System fix data
Course over ground and ground speed
NMEA0183 navigation input:
APB
RMB
XTE
Autopilot sentence “B”
Recommended minimum navigation information
Cross-Track-Error, measured
NMEA0183 output sentences:
DBK
DBS
DBT
DPT
MTW
VHW
WPL
Depth below keel
Depth below surface
Depth below transducer
Depth, including offset
Water temperature
Water speed heading
Waypoint location

Simrad EQ42 Specifications

General

Brand	Simrad
Model	EQ42
Category	Marine Equipment
Language	English