EQ42/50/52 Fundamentals & initial start-up Chapter 2
8
As many as 4 screen combinations or full
screens can be saved in four pages.
Press the
[PAGE] key to toggle between the
four pages, or hold the [
PAGE] key depressed
to start a rotation of the four pages.
Press [
PAGE]
again to return to manual
operation.
To mix and match the various echo and data displays you wish to have
in the PAGE and WINdows pesentation, you will first need to know
what is pre-set from the factory:
PAGE
Scroll through the four pre-set pages to see if you wish to exchange
any of the displays with a different one.
Example of how to edit a pre-set page:
window
2
window
5
window
3
We pretend that in this page, window 2 contains the
navigation display (highway), window 3 an echo
display in 50kHz, and window 5 an echo display in
200kHz.
You now wish to insert the “Echosounder setup” display in window 3
instead of the echo display in 50kHz. This is the procedure:
WIN
Press the
[WIN]
key until the frame around window 3 is highlighted
MENU
Call up the menu bar, and…
3,8
then call up the ECHO menu and select “Echosounder setup”
- you will now have the “Echosounder setup” display in window 3
instead of the echo display in 50kHz.
Example of how to edit a full screen to four ¼ displays:
We pretend that you are looking at a full screen which you wish to
divide into four ¼ displays. This is the procedure:
MENU
First call up the menu bar, and…
1
then call up the POS menu - see example next page.
To Next Page
Loading...
Need help?
General
