Configure
Select to configure the device.
Upgrade
Updates the device software.
Ú
Note: A USB memory stick with the software upgrade must be plugged into the device.
Periodic software updates may be available from the product website. Detailed
instructions for how to install the software are included with the upgrade files.
Factory Reset
Resets the device to factory defaults.
SonicHub 2 is Bluetooth enabled
The SonicHub 2 is a Bluetooth enabled device. You can use the SonicHub 2's built-in
Bluetooth wireless to connect it to Bluetooth enabled audio devices.
To pair the SonicHub 2 to a Bluetooth enabled device select the Bluetooth devices icon in
the Controls menu. Choose the Bluetooth device you want to pair to from the list of
available devices and then select Pair.
The SonicHub 2 connects to the paired device.
Connecting and disconnecting paired devices
The SonicHub 2 automatically connects to a device when you pair them. You can pair it to
several devices but only one device can be connected at a time.
You can manually disconnect and connect the SonicHub 2 to paired devices.
To disconnect a paired device, select the paired device in the device list and then select
Disconnect.
Audio| NSO evo2 Operator Manual
107
To Next Page
Loading...
Need help?
General
