Multiple MOB waypoints can be created. The vessel continues to
show navigation information to the initial MOB waypoint.
Navigation to subsequent MOB waypoints needs to be done
manually.
Stop navigating to MOB
The system continues to display navigational information towards
the MOB waypoint until you cancel the navigation from the menu.
Simulator mode
The simulate option lets you operate the unit without being
connected to sensors or other devices.
It is not possible to simulate commissioning and setup.
If the unit is turned off while in simulator mode, this mode will still
be active on next power on.
Active simulator mode is indicated with a flashing notification on
the image.
Basic operation | P2005/P3007 Operator Manual
15
To Next Page
Loading...
Need help?
General
