WAAS PRN number
Used for manually setting the WAAS PRN number.
Reset option
Ú
Note: After a reset, a command is automatically sent to the
antenna, configuring it to 19 200 baud and relevant NMEA 0183
messages.
Warm reset
Sets the baud rate to 4800 and the NMEA 0183 messages to default.
Cold reset
Sets the baud rate to 4800, the NMEA 0183 messages to default, and
clears the oscillator, ephemeris and almanac data.
Navigation settings
Navigation method
Different methods are available for calculating the distance and
bearing between any two geographical points.
The Great circle route is the shortest path between two points.
However, if you are to travel along such a route, it would be difficult
to steer manually as the heading would constantly be changing
(except in the case of due north, south, or along the equator).
Rhumb lines are tracks of constant bearing. It is possible to travel
between two locations using Rhumb line computation, but the
distance would usually be greater than if Great circle is used.
34
Software setup | P2005/P3007 Operator Manual
To Next Page
Loading...
Need help?
General
