Restore global settings
This option clears the global NMEA 2000 source selection on all
networked devices, and resets all local settings to factory default.
After a global reset you need to configure all NMEA 2000 and local
sources again when the unit restarts.
Restore local settings
Resets all local settings to factory default.
After a local reset you need to configure local sources again when
the unit restarts.
Restore waypoints and routes
Removes all waypoints and routes from the display.
Backup and restore of system data
The system includes a backup and restore function, making it
possible to back-up and restore user settings.
Ú
Note: It is strongly recommended to make a backup when the
system is installed and configured.
Maintenance | P2005/P3007 Operator Manual
47
To Next Page
Loading...
Need help?
General
