Trip log settings
Use STW
Used for setting the speed source to be speed through water. When
enabled, the speed data will be STW rather than speed over ground
(SOG) on the trip log page.
Set log
Allows for manually entering the total trip log distance.
AIS settings
MMSI
Used for entering your own MMSI (Maritime Mobile Service Identity)
number into the system. You need to have this number entered to
receive addressed messages from AIS and DSC vessels. You also
need to have your MMSI number entered to avoid seeing your own
vessel as an AIS target.
Software setup | P2005/P3007 Operator Manual
31
To Next Page
Loading...
