104 |
Appendix A | V5035 Operator and Installation Manual
6 A
Status , ground speed, A = data valid, V = data
invalid
7 x.x Stern transverse water speed , knots ignored
8 A
Status : stern water speed,A = data valid, V = data
invalid
ignored
9 x.x Stern transverse ground speed ,knots ignored
10 A
Status : stern ground speed,A = data valid, V =
data invalid
ignored
VHW – Water speed and heading
The compass heading to which the vessel points and the speed of
the vessel relative to the water
$--VHW, x.x, T, x.x, M, x.x, N, x.x, K*hh<CR><LF>
Field No. Format Description Remark
1 x.x, T Heading, degrees true
2 x.x, M
Heading, degrees magnetic Ignored
3 x.x, N Speed, knots Ignored
4 x.x, K Speed, km/h Ignored
VSD – AIS Voyage Static Data
This sentence is used to enter information about a ship’s transit that
remains relatively static during the voyage
$--VSD,x.x,x.x,x.x,c—c,hhmmss.ss,xx,xx,x.x,x.x*hh<CR><LF>
Field No. Format Description Remark
1 x.x Type of ship and cargo category
2 x.x Maximum present static draught
3 x.x Persons on-board
4 c—c Destination
5 hhmmss.ss Estimated UTC of arrival at destination
6 xx Estimated day of arrival at destination
7 xx Estimated month of arrival at destination
8 x.x Navigational status
9 x.x Regional application flags
To Next Page
Loading...
Need help?
General
