Simrad WR20 RemoteCommander - Color; Timeout (Lights); LCD Contrast; Keylock

To return to the user settings list press
W
.
4.2.1.2 Colour
Highlight “Colour” and then use the
X key to highlight the colour
value. Press the
V or W key to toggle the colour between “Red”
and “White”.
To return to the user settings list press
W
.
4.2.1.3 Light Time
Following a key press the backlights come on for a predefined
period. This period can be adjusted by highlighting “Light Time”
and then using the
X key to highlight the timeout value. Press the
V or W key to select a time delay of 10s, 20s or 30s for the lights
to remain on after a key press.
To return to the user settings list press
W
.
4.2.1.4 LCD contrast
Highlight “Contrast” and then use the
X key to highlight the
contrast value. Use the
V or W keys to adjust the Display Contrast
to a suitable level between 0 - 40.
To return to the setup list press
W
.
4.2.1.5 Auto KeyLock
Highlight “Auto KeyLock” and then use the
X key to highlight the
time delay interval. Use the
V or W keys to toggle the delay
interval between Off, 30s or 60s.
To return to the setup list press
W
4.2.1.6 KeyBeep
An audible KeyBeep can be switched on or off. Highlight
“KeyBeep” and then use the
X key to highlight the current setting.
Use the
V or W keys to toggle the KeyBeep between On or Off.
To return to the setup list press
W
.
Handset Configuration
25
Handset
Configuration