Simrad WR20 RemoteCommander User Manual

Autopilot
6.3 Standby mode
To gain control of the Autopilot, press STBY/A
UTO
key. The
“Inactive” symbol disappears from the display, and the MODE
SoftKey function appears (Fig. 6.2).
In Standby mode pressing the
W
Port or X Starboard NavPad key
will control the rudder. If either key is pressed, the display will
indicate “Power Steer” (Fig. 6.3).
Note As rudder is added in either direction, the display will change to
show a single arrow “
Ì
” and a double arrow “
ÌÌ
”.
6.4 Steering modes
Pressing the MODE SoftKey enters the steering mode menu,
“Standby” and “Auto Compass” will be listed as standard. Further
options such as Auto NoDrift, Auto Nav and Auto Wind, may be
listed depending on the settings of the Autopilot itself (Fig. 6.4).
Use the
V or W keys to scroll through the menu options. Press the

M
ENU key to select the mode you want to enter.
WR20 Remote Commander
34
Fig. 6.2 - Standby mode (Active)
^mORJNN
pq^ka_v
NPS°j
eb^afkdW
jlab
m••••••MR••••••p
Fig. 6.3 - Powersteer display
^mORJNN
pq^ka_v=
=
kcr
W mçïÉê=píÉÉê===X
NPS°j
eb^afkdW
jlab
P••••••15
ÌÌÌ
•••S
F
F

Simrad WR20 RemoteCommander Specifications

General

Brand	Simrad
Model	WR20 RemoteCommander
Category	Radio
Language	English