Simrad WR20 RemoteCommander - Unit selection

4.2.2 Unit selection
Selecting “Unit selection” from the “WR20 Setup” menu will
display data in predefined units of measurement, however, these
can be changed to meet individual needs (Fig. 4.4).
The full list includes:
• Depth
• Boat Speed
• Wind Speed
• Distance
• Temperature
4.2.2.1 Depth units
Highlight “Depth” and then use the
X key to highlight the current
depth unit. Use the
V or W keys to toggle between feet and meters.
To return to the setup list press
W
.
4.2.2.2 Boat speed units
Highlight “Boat Speed” and then use the
X key to highlight the
current units. Use the
V or W keys to change between knots, miles
per hour and kilometres per hour.
To return to the setup list press
W
.
4.2.2.3 Wind speed units
Highlight “Wind Speed” and then use the
X key to highlight the
current units. Use the
V or W keys to change between knots,
kilometers per hour, miles per hour, meters/sec and Beaufort.
To return to the setup list press
W
.
WR20 Remote Commander
26
Handset
Configuration
Fig. 4.4 - Unit selection options
W
råáí=
=
pÉäÉÅíáçå
aÉéíÜW
_ç~í= péÉÉÇW
táåÇ= péÉÉÇW
aáëí~åÅÉW
F
j
hq
hq
hj