Simrad WR20 RemoteCommander - Auto Compass mode; DODGE (Powerboat)

Autopilot
Pressing CANCEL returns you to the previous mode
Note Throughout this chapter, Pressing the MODE SoftKey when
available will open the “Steering Mode” menu.
6.5 Auto Compass mode
Selecting the “Auto Compass” mode from the menu, the following
information will be displayed (Fig. 6.5) for powerboats and (Fig.
6.6) for sailboats.
Pressing the
W or X Nav key allow you to make course
adjustments in 1 degree increments. Holding the key down, makes
changes at a rate of 5 degrees per second, until released.
6.5.1 DODGE (Powerboat)
Press the DODGE Softkey to initialise a Dodge. The display will
change to show “DODGE” flashing in the display (Fig. 6.7).
Enter a direction for the Dodge by pressing the
W or X Nav key.
The amount of turn will increase the longer the key is held down.
Autopilot
35
Fig. 6.4 - Steering mode
^mORJNN
pí~åÇÄó
^rql= `çãé~ëë
^rql= kçaêáÑí
`^k`bi
Fig. 6.5 - Auto Compass
(Powerboat)
Fig. 6.6 - Auto Compass
(Sailboat)
^mORJNN
^ìíç=
=
`çãé~ëë
NPS
NPV
`lropbW
eb^afkdW
aladb
jlab
^mORJNN
^ìíç=
=
`çãé~ëë
NPS
NPV
`lropbW
eb^afkdW
q^`h jlab
F
F
F
°j
°j