WR20 Remote Commander
30
Handset
Configuration
F
The WR20 will only control the VHF whose black box is
connected directly to the wireless base station. If this is RS80-1
Class D in the example above then this radio must be selected from
the list. All VHF operation from the handset will then control the
selected radio.
From the “Select Radio” menu select the appropriate radio from
the list, and press
M
ENU.
To return to the setup list press
W
.
Fig. 4.8 - Selecting a radio
pÉäÉÅí=
=
o~Çáç
opUMJN= `ä~ëë=a
opUMJO= `ä~ëë=a==
To Next Page
Loading...
