26
uSIng the all-purpoSe foot
No. 1, 4, 7, 15, 34, 37, 38
All-Purpose Foot (A)
Place fabric so that the needle falls near the edge of the fabric
when using the All-Purpose Foot.
No. 1 For narrower zigzag width (Width=2.0-4.5).
No. 4, 7, 15, 34, 37, 38 when sewing easy to ravel or stretch
fabrics.
CRAZY PATCH
Create interesting surface embellishment by sewing decorative
stitches over the seams. Try mixing several types of fabrics for
even more variety.
No. 0
All-Purpose or Satin Foot (A, B)
1. Place two pieces of fabric right sides together and sew a
long straight stitch.
2. Press the seam open.
No. 5, 44
3. With the right side of the fabric facing up, sew the decorative
stitch, making sure the stitches fall on both sides of the
seam.
CAUTION
To prevent accidents, the Overcasting Foot should
be used for sewing patterns 1, 3, 33, 35, 36 only. Do
not change the stitch settings. It is possible that the
needle could hit the presser foot and break when
sewing other patterns and settings.
NOTE:
g. If desired, trim the excess fabric after stitching is complete.
Be careful not to cut the threads while trimming.
To Next Page
Loading...
