40
NOTE:
If the selected folder has a memorized
sequence in it previously, a message will
appear asking to rewrite over the previous
sequence or not. To rewrite (deleting
previous sequence), press the “
✓”
. To
cancel (exit), press the “X”. The message
will disappear.
3. When the selected memory number is highlighted, press
the “
✓
” button.
4. Sequence Screen will appear and the Folder icon indicate
the number of memorized folder.
b. To recall memorized sequence
1. Press the Load button on the Sequence Screen.
2. The memories are indicated by numbers. Press the desired
sequence/memory.
3. When the selected le number is highlighted, press the “
✓
”
button.
4. Recalled sequence is shown on the left side of LCD.
You can now sew the recalled sequence.
NOTE:
If another sequence has been created or loaded before
loading from memory, the loaded sequence will be added
to the next of cursor.
You can save stitch sequences into memory. There are
four separate memory folders for saving stitch sequences.
Memorized sequences remain in the memory if you turn off the
machine.
a. To memorize or save a sequence
1. Press the Memory button after you have selected patterns
or letters.
2. Select one of the four memories by pressing directly. (If
cancel, press “X” button)
adJuStIng each pattern or letter In a
S
eQuence
You can change the settings (stitch width/length, mirror/
reverse) of each stitch pattern.
1. Shift the cursor to the pattern you want to edit.
2. Change the setting as normal setting. (Page 14)
To Next Page
Loading...
