Sinoboom 1323RD - Page 10

© Mar. 2022 ii 1323RD&1623RD Operation Manual
Steer thumb rocker switch . . . . . . . . .6-12
Drive switch. . . . . . . . . . . . . . . . . . . . . . . .6-12
Drive speed select switch. . . . . . . . . .6-12
Outrigger leveling . . . . . . . . . . . . . . . . . .6-13
Testing the Platform Controller (-
Sinoboom Control System) . . . . . . . . . .6-13
Preparation . . . . . . . . . . . . . . . . . . . . . . . .6-14
Ignition switch. . . . . . . . . . . . . . . . . . . . . .6-14
Emergency stop button . . . . . . . . . . . .6-14
Glow plug switch. . . . . . . . . . . . . . . . . . .6-14
Horn button . . . . . . . . . . . . . . . . . . . . . . . .6-14
Engine speed select switch . . . . . . . .6-15
Platform up/down function . . . . . . . . .6-15
Steer thumb rocker switch . . . . . . . . .6-15
Drive switch. . . . . . . . . . . . . . . . . . . . . . . .6-15
Climbing mode. . . . . . . . . . . . . . . . . . . . .6-16
Outrigger leveling . . . . . . . . . . . . . . . . . .6-16
Testing the Emergency Lowering
Function. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-16
Testing the Level Sensor . . . . . . . . . . . . .6-17
Testing the Drive Speed. . . . . . . . . . . . . .6-17
Testing the Oscillate Outriggers . . . . . .6-18
Testing the Weighing System . . . . . . . .6-18
7 Operating the machine ......... 7-1
Emergency Stop . . . . . . . . . . . . . . . . . . . . . . 7-1
Starting the Engine. . . . . . . . . . . . . . . . . . . . 7-1
Emergency Lowering . . . . . . . . . . . . . . . . . 7-2
Operation from Ground . . . . . . . . . . . . . . . 7-2
Selecting Engine Speed . . . . . . . . . . . . . . 7-3
Operation from Platform . . . . . . . . . . . . . . 7-3
Driving on a Slope. . . . . . . . . . . . . . . . . . . . . 7-4
Extending and Retracting the Platform 7-4
Operating the Outriggers. . . . . . . . . . . . . . 7-5
8 Transporting and Lifting the
Machine ........................... 8-1
Releasing the Brake . . . . . . . . . . . . . . . . . . 8-1
Transporting the Machine . . . . . . . . . . . . . 8-1
Lifting the Machine with a Crane . . . . . . 8-2
9 Maintenance ...................... 9-1
Conducting a Pre-delivery Inspection . 9-1
Following a Maintenance Schedule . . . 9-2
Completing a Repair & Inspection
Report. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-2
Major Modification and Repair Record 9-5
10 Decals/Nameplates
Inspection ....................... 10-1
Decals/Nameplates(GB). . . . . . . . . . .10-2
Decals/Nameplates(AS) . . . . . . . . . . .10-5
Decals/Nameplates(CE-Imperial) .10-8
Decals/Nameplates(CE-Metric) . .10-11
Decals/Nameplates(CSA) . . . . . . . 10-14
Decals/Nameplates(ANSI). . . . . . . 10-17
Appendix 1: Symbols and
Description....................... A-1
Appendix 2: Prepare the Work
Record Before Delivery ....... A-5
Appendix 3: Repair & Inspection
Report ............................. A-7
Appendix 4: Major Modification
and Repair Record ............A-11