System Setup
5-10
PSAD Coefficient To set up Prostate Specific Antigen Density coefficient
Fetal Growth Curves Edit To edit fetal growth curves
Fetal Age Estimating Select To choose fetal age table
Fetal Age Estimating Edit To edit fetal age table
Measurement Line Type To set up Calc/Meas line type
Display OB Measurement
Traces
To display OB Measurement Traces
5.2.5.1 BSA（Body Surface Area）equation
There are two calculation equations: Stevenson and Grossman for selection.
5.2.5.2 Distance Unit
There are 4 units: cm (centimeter), ft (foot), in (inch) and mm (millimeter) for selection.
5.2.5.3 Volume Unit
There are 5 units: cm
3
(cubic centimeter), ft
3
(cubic foot), in
3
(cubic inch), mm
3
(cubic
millimeter) and ml (millimeter) for selection.
5.2.5.4 Time Unit
There are 2 units: ms (millisecond) and s (second) for selection.
5.2.5.5 Height Unit
There are 2 units: cm (centimeter) and ft (foot) for selection.
5.2.5.6 Weight Unit
There are 2 units: kg (kilogram) and lb (pound) for selection.
5.2.5.7 Age Unit
There are 3 units: Yrs (years), Mns (months) and Wks (weeks) for selection.
5.2.5.8 Beat Cycle
The beat cycles between 2 measurement control points can be set from 1 to 9.
5.2.5.9 PSAD Coefficient
For prostate specific antigen density setup, select PSAD Coefficient on the calculation
and measurement setup submenu and press
Enter to pop up input box, in which the
To Next Page
Loading...
