SIYI A8 mini - Page 41

A8 mini User Manual v1.5
34
2023 SIYI Technology Co., Ltd, All Rights Reserved
Mark: Acquire camera image type command is only available for ZT30 at this moment.
Set Camera Image Type
CMD_ID:0x11------Set Camera Image Type
Send data format
No.
Data Type
Data Name
Description
1
uint8_t
vdisp_mode
Camera Image Mode:
0: Split Screen (Main: Zoom &
Thermal. Sub: Wide Angle)
1: Split Screen (Main: Wide Angle &
Thermal. Sub: Zoom)
2: Split Screen (Main: Zoom & Wide
Angle. Sub: Thermal)
3: Single Image (Main: Zoom. Sub:
Thermal)
4: Single Image (Main: Zoom. Sub:
Wide Angle)
5: Single Image (Main: Wide Angle.
Sub: Thermal)
6: Single Image (Main: Wide Angle.
Sub: Zoom)
7: Single Image (Main: Thermal. Sub:
Zoom)
8: Single Image (Main: Thermal. Sub:
Wide Angle)
ACK data format
1
uint8_t
vdisp_mode
Camera Image Mode:
0: Split Screen (Main: Zoom &
Thermal. Sub: Wide Angle)
1: Split Screen (Main: Wide Angle &
Thermal. Sub: Zoom)
2: Split Screen (Main: Zoom & Wide
Angle. Sub: Thermal)
3: Single Image (Main: Zoom. Sub:
Thermal)
4: Single Image (Main: Zoom. Sub:
Wide Angle)
5: Single Image (Main: Wide Angle.
Sub: Thermal)
6: Single Image (Main: Wide Angle.
Sub: Zoom)
7: Single Image (Main: Thermal. Sub:
Zoom)
8: Single Image (Main: Thermal. Sub:
Wide Angle)
Mark: Set camera image type command is only available for ZT30 at this moment.
Read Temperature of a Point
CMD_ID:0x12------Read Temperature of a Point
Send data format
No.
Data Type
Data Name
Description