FT24 User Manual V1.1
28
2020 SIYI Tech All Rights Reserved
About Model Settings
CH Monitor (Channel Monitor)
Real-time display of all channels’ output value.
Model Select
Select / Save model data.
Model Type
Choose the right type for your model.
End Point
Set the output values of a channel and maximum / minimum limit.
CH Mapping (Channel Mapping)
Set / Change the defined joystick/button/switch of a channel.
CH Reverse (Channel Reverse)
Reverse a channel’s output direction.
Sub-trim
Do trimming adjustment to your model’s flight attitude.
Trim Setting
Adjust stepping value of the sub-trim function.
Fail Safe
Adjust fail safe settings.
ProgMix (Programming and Mixing)
Configuring for transmitter programming and mixing.
Trainer Mode (Master-slave)
To Next Page
Loading...
