FT24 User Manual V1.1
45
2020 SIYI Tech All Rights Reserved
receiver will output the last channel value before losing control.
5. Enter “OFF”, it turns to “ON”. Fail-Safe function is activated.
6. Then enter a channel, “HOLD” turns to “0”, then use “+” “-” button to input Fail-
Safe value.
7. “ESC” to finish.
WARNING
For flight safety, Fail-Safe configuration must be done and the function must stay “ON”.
5.10 ProgMix (Programming and Mixing)
For some complex requirement of operating models, mostly helicopters and planes,
FT24 transmitter supports up to 10 groups of programming and mixing. Linear
control from 1 to 6, curve control from 7 to 10.
To Next Page
Loading...
