FT24 User Manual V1.1
53
2020 SIYI Tech All Rights Reserved
Steps
1. Go to Throttle Hold page. Turn “Enable” to “ON”.
2. Use “+” and “-” buttons to set an output value for throttle channel.
3. Define a physical to turn on/off Throttle Hold function immediately.
5.14-5.15 Throttle Curve / Pitch Curve
For smoother experience on operating throttle stick, FT24 supports up to 3 groups
of curves, each group of which supports up to 6 points for adjusting.
To Next Page
Loading...
