SIYI FT24 - Receiver and Transmitter Are Not Bond

FT24 User Manual V1.1
93
2020 SIYI Tech All Rights Reserved
3. Upload the latest firmware files for FR / FR Mini receiver and click on “Upgrade”.
Then wait till the process is 100% finished.
9.2.2 Receiver and transmitter not bound.
1. Connect FT24 transmitter to your computer.
2. Power on FR / FR Mini receiver and wait for 5 seconds.
3. Cut and connect receiver battery power for 6 times (1-second interval of each
time). Receiver status indicator blinks red and green fast. Receiver is standby
for firmware upgrade.
4. Run “SIYI Assistant v1.2.7” to check the transmitter’s current firmware version.
5. Upload the latest firmware files for FR / FR Mini receiver and click on “Upgrade”.
Then wait till the process is 100% finished.