FT24 User Manual V1.1
60
2020 SIYI Tech All Rights Reserved
5.21 Multi-Drone Control
FT24 transmitter supports users to control up to three drones (receivers / aircrafts)
simultaneously.
To Switch Control Among Drones
The function is to switch control drones which are bond / linked with FT24 transmitter, from
Drone No.1 to No.3.
When the “Syn-control” function is not activated, the transmitter controls only one drone.
Under this circumstance, if you switch control from the current-in-control drone to another,
for the not-in-control drones, their channel 1 to channel 4 stays in center (1500), while the
other channels won’t change.
Only on the current-in-control drone, datalink is working.
Syn-Control
When the “Syn-control” function is turned on, FT24 transmitter controls up to three drones
simultaneously and outputs the same channel value to all of them. Under this circumstance,
all drones fly in same pace.
To Next Page
Loading...
