FT24 User Manual V1.1
74
2020 SIYI Tech All Rights Reserved
4. Tap on “Upgrade” to finish.
6.7 ESC Cali
FT24 transmitter simplified ESC calibration process. Users just wire their ESC with
FR receiver’s PWM port 1 to 8, then follow what the transmitter guides in “ESC
Calibration” page the steps below to do calibration.
Steps
1. Go to “ESC Cali” page.
2. Follow the guide and connect your ESC signal wires to FR Receiver’s PWM port
1 to 8, then enter “Start”.
To Next Page
Loading...
