FT24 User Manual V1.1
62
2020 SIYI Tech All Rights Reserved
5.22 RC Relay
RC Relay function is designed for long range flight which can only be done by relay
control between two FT24 transmitters.
Steps
1. Prepare two units of FT24 transmitters and one FR / FR Mini receiver. Mark the
two transmitters as TX1 and TX2.
2. Bind TX1 with receiver, then turn on RC Relay function. TX1 is slave transmitter.
3. Bind TX2 with receiver. TX2 is master transmitter even if after restarted.
4. Define a physical switch for switching control from TX1 to TX2.
To Next Page
Loading...
