FT24 User Manual V1.1
61
2020 SIYI Tech All Rights Reserved
Datalink still works on one drone, which is the current-in-control drone before turning on
“Syn-control”.
CAUTION
Please make sure there is safe distance between each of your drones before turning on “Syn-
Control”.
Steps
1. Go to “Multi-Drone Control” page.
2. Enter “Switch Drone” to define a switch for switching control among drones.
3. Enter “Syn-Control” to define a switch for turning on / off the function.
4. In this page, bind / link each drone to FT24 transmitter one by one.
To Next Page
