FT24 User Manual V1.1
70
2020 SIYI Tech All Rights Reserved
6. After detecting, please push both joysticks their maximum positions and operate
them in circle for several times.
7. Enter “Finish” when all steps are done.
6.5 Knob Calibration
Knob Calibration help maintain both knobs’ output accuracy. Calibration is required
when the knobs stay out of their middle position (channel value is not 0) or do not
reach the maximum / minimum position.
Steps
1. Go to “Knob Calibration” page.
To Next Page
Loading...
