FT24 User Manual V1.1
84
2020 SIYI Tech All Rights Reserved
Go to “Voltage Calibration - PWR” page, enter “Cali Volt” and use “+” and “-”
buttons to input “25.0 V” as a standard voltage to calibrate.
3. Enter “SET”, aircraft voltage calibration is done when the page displays the
same information.
6.5 PWM Settings
Users can re-define all 8 PWM channels on FR receiver through PWM settings. In
default, PWM channels 1 to 8 are mapped with transmitter channel 1 to 8. They are
free to be mapped with all 16 transmitter channels.
To Next Page
Loading...
