FT24 User Manual V1.1
38
2020 SIYI Tech All Rights Reserved
5.5 Channel Mapping
All 16 channels in FT24 transmitter can be mapped freely to joysticks, switches,
buttons, and dials.
Steps
1. Go to “Model” page, enter “CH Mapping”.
2. The page displays information as in the picture below. Enter middle boxes will
lead to a list of all joysticks, switches, buttons, and dials.
3. In default, channel 1-4 is to be Aileron, Elevator, Throttle, and Rudder.
4. Let’s take example. If you are to re-map Channel 1 (Aileron), enter CH1’s middle
To Next Page
Loading...
