8. Shutdown
8.1. Temporary shutdown
The described product can be temporarily shut
down by disconnecting the electrical, pneumatic,
and/or hydraulic supply connections. The
instructions in Chapter 1, "Safety instructions" in
these owner’s manual must be observed when doing
so.
If the product is to be shut down for an extended
period of time, follow the instructions in Chapter
5, "Transport, delivery, and storage" in these
owner’s manual.
To recommission the product, follow the instructions
in Chapters 4, "Assembly instructions" und 6,
"Operation" in these owner’s manual.
8.2. Permanent shutdown
If the product will be permanently shut down, the
local regulations and laws regarding the disposal of
contaminated equipment must be observed.
Warning!
Lubricants can contaminate soil and bodies
of water. Lubricants must be used and
disposed of properly. Observe the local
regulations and laws regarding the
disposal of lubricants.
The product can also be returned to SKF Lubrication
Systems Germany GmbH for disposal, in which case
the customer is responsible for reimbursing the
costs incurred.
To Next Page
Loading...
Need help?
General
