1.3. Electric shock hazard
Electrical connections for the described product may
only be established by qualified and trained
personnel authorized to do so by the operator, and
in observance of the local conditions for connections
and local regulations (e.g., DIN, VDE). Serious injury
or death and property damage may result from
improperly connected products.
Danger!
Performing work on an energized pump or
product may result in serious injury or
death. Assembly, maintenance, and repair
work may only be performed on products
that have been de-energized by qualified
technical personnel. The supply voltage
must be switched off before opening any of
the product's components.
1.4. System pressure hazard
Danger!
Centralized lubrication systems are
pressurized during operation. Centralized
lubrication systems must therefore be
depressurized before starting assembly,
maintenance or repair work, or any system
modifications or system repairs.
1.5. Warranty and liability
SKF Lubrication Systems Germany GmbH assumes
no warranty or liability for the following:
o Non-compliant usage
o Improper assembly/disassembly or improper
operation
o Use of unsuitable or contaminated lubricants
o Maintenance and repair work performed
improperly or not performed at all
o Use of non-original SKF spare parts
o Alterations or modifications performed without
written approval from SKF Lubrication Systems
Germany GmbH
o Non-compliance with the instructions for
transport and storage
To Next Page
Loading...
Need help?
General
