Ski-Doo SCANDIC WT - 32 Backrest

mmo2008-001-019_b
TYPICAL
1. Seat latch
2. Tip driver seat over
Slide the passenger seat forward, then
lift to remove.
mmo2008-001-019_c
TYPICAL
Step 1: Slide seat forward
Step 2: Lift seat to remove
1. Passenger seat
CAUTION: Take care to store the
passenger seat properly to avoid
any damages.

WARNING
NEVER use the space left by re-
moving the passenger seat to sit
a passenger. The passenger c
ould
hurt his back or suffer other seri-
ous injuries due to his seating po-
sition.

WARNING
All objects in rear rack must be
properly latched. Do not carry
any breakable objects. Excessive
weight in rack may reduce steer-
ing ability.
Installation is the reverse of removal
procedure. Pay attention to the fol-
lowing.

WARNING
Make sure that the passenger seat
is locked securely in place before
using the snowmobile.
mmo2008-001-019_d
TYPICAL
1. Passenger seat hooks
32) Backrest

WARNING
Never ride with a passenger with-
out the backrest properly installed.
Skandic SWT Only
To remove backrest, remove retaining
hardware on both sides.
mmo2008-001-020_a
TYPICAL
1. Retaining hardware
46
______________________