EasyManua.ls Logo

Ski-Doo SCANDIC WT - Shutting off the Engine; Post-Operation Care

Ski-Doo SCANDIC WT
135 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Shut-off the engine and remove the
wide-base snowmobile mechanical
stand.
Skis may be frozen on the ground.
Grab both skis one at a time by their
loops and lift their front end slightly off
the ground.
After restarting engine, the vehicle can
be driven at low speed for the first 2 or
3 minutes of riding. After that, it may
be driven up to the legal speed limit as
per normal safety practices.
Shutting Off the Engine
Release throttle lever and wait until
engine has returned to idle speed.
Shut off the engine using either ig-
nition switch, engine cut-out switch
or tether cord cap (DESS key) engine
cut-out switch.
WARNING
Always remove tether cord cap
(DESS key) and ignition key when
vehicle is not in operation in order
to prevent accidental engine start-
ing or to avoid unauthorized use
by children or others or theft.
Post-Operation Care
Shut off the engine. Install rear of ve-
hicle on a wide-base snowmobile me-
chanical stand.
Remove snow and ice from rear
suspension, track, front suspension,
steering mechanism and skis.
Always cover your snowmobile when
leaving it outside overnight or during
extended periods of inactivity. This
will protect it from frost and snow as
well as help retain its appearance.
56
______________________

Table of Contents

Related product manuals