Skydio X2 User Manual

12
Skydio X2 Color/Thermal - Operator Manual © 2022 Skydio, Inc. All rights reserved.
Getting Started
Deploy Skydio X2
Step 5 - Slide the battery on to the rails towards the camera until the magnets engage
Step 6 - Gently push the antennas inward to release
• guide into a vertical position
Step 7 - Power on your Skydio X2
• press and hold the power button on the battery for 3 seconds
TIP: This is the suggested order of operations when deploying your X2 for the first time. It is not necessary to unfold the
arms and antennas prior to installing the battery and powering on the drone. On subsequent deployments insert the
battery and power on the aircraft first, then unfold the arms and antennas while the drone is booting up.

Skydio X2 Specifications

General

Brand	Skydio
Model	X2
Category	Drones
Language	English