50
Skydio X2 Color/Thermal - Operator Manual © 2022 Skydio, Inc. All rights reserved.
Post-flight
Step 1 - Power o Skydio X2
• press and hold the battery button for three seconds
Step 2 - Power o Skydio Enterprise Controller
• press and hold the power button for three seconds
• select Power O
Step 3 - Gently push in and down antennas to lock in place
Dismantle Skydio X2
Step 4 - Release the 4 arm clamps
Step 5 - Lift the motor arms and fold in towards the body
• if you feel any resistance when opening the arms, push
outward (horizontally) on the arm to unseat
Step 6 - Return the 4 arm clamps to the locked position
• ensure that the blue marks align
WARNING: Propeller blades are sharp. Handle with care.
To Next Page
Loading...
