42
Skydio X2 Color/Thermal - Operator Manual © 2022 Skydio, Inc. All rights reserved.
Enable GPS Night Flight when flying in low-light conditions. When in this mode, Skydio X2 will disable obstacle
avoidance and use GPS sensors, instead of its vision system, to navigate. Skydio X2 will display an alert message if
the environment is too dark to fly using the vision navigation system and will prompt you to fly using GPS Night Flight.
Flight
GPS Night Flight
WARNING: GPS Night Flight mode requires flying without obstacle avoidance. Skydio X2 may drift slightly when in GPS
Night Flight mode; take extra caution when flying in this mode and do not stand near the vehicle.
Step 1 - Select Device Settings gear icon
Step 2 - Select the Drone tab and scroll down
Step 3 - Select GPS Night Flight and toggle on
Step 4 - Select Lights
• toggle on RGB navigation, Infrared, or Strobe lights
• Infrared and Strobe lights cannot be on at the same time
Step 5 - Complete calibration if required
• see instructions on the next page
Step 6 - Navigate back to the fly screen
Step 7 - Launch Skydio X2
• X2 will automatically rotate 360° to establish a heading
• obstacle avoidance will be disabled
To enable GPS Night Flight:
To Next Page
Loading...
Need help?
General
