13
Skydio X2 Color/Thermal - Operator Manual © 2022 Skydio, Inc. All rights reserved.
Getting Started
Activate Enterprise Controller
WARNING: This password cannot be recovered or reset if forgotten! Ensure it is written down and stored in a safe
location. If the password is lost, the controller will no longer be usable and will need to be replaced.
Step 1 - Power on the controller
Step 2 - Read and accept Skydio purchase terms
Step 3 - Connect to the Internet
Step 4 - Enter your email address for verification
Step 5 - Retrieve the activation code from your email
Step 6 - Enter the code and select Next
Step 7 - Set a password for the controller (optional)
• to unlock the controller when powering on
• to wake the controller from a sleep state
Activation complete -
• a message will display prompting you to pair the controller with
your Skydio X2
To Next Page
Loading...
