25
Skydio X2 Color/Thermal - Operator Manual © 2022 Skydio, Inc. All rights reserved.
1. Left joystick - height and rotation
(Mode 2 - default)
2. Right joystick - lateral movement
(Mode 2 - default)
3. Back/Menu - navigate to previous screen
4. D-pad
5. C1 button - toggle Obstacle Avoidance
6. C2 button - toggle lights
7. RTH button - Return to Home
8. Power button -
• press once to sleep/wake the screen
• press and hold to power on/o
9. Launch/Land button
10. Pause button - pause an autonomous action
11. R1 button - shutter/record
12. L1 button - boost, temporarily fly at max speed
13. Right wheel - zoom
14. Left wheel - gimbal tilt
15. R2 button - toggle map view
16. L2 Button - toggle camera view
5 86 97 10
1
11 12
3
13 14
15 16
2
4
Pre-flight
Flight controls
Touch gestures:
• Drag vertically to increase or decrease gimbal pitch
• Drag horizontally to adjust yaw
• Pinch and drag your fingers away from each other to digitally zoom in up to 16x
• Pinch and drag your fingers toward each other to zoom out back to 1x, then out to Superzoom
• Double-tap anywhere on the fly screen to select a location and X2 will fly to that location
Directional pad (D-pad) controls:
• Navigate through settings and screens: push up, down, left, or right
• Select: press in
• Adjust sliders:
• Scroll until the slider is highlighted
• Press in to select—the slider will turn blue to indicate it is active
Push left or right to adjust slider values, then press in to confirm
Use Back button to exit a menu
To Next Page
Loading...
Need help?
General
