EasyManuals Logo

Skydio X2 User Manual

Skydio X2
80 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #51 background imageLoading...
Page #51 background image
47
Skydio X2 Color/Thermal - Operator Manual © 2022 Skydio, Inc. All rights reserved.
Flight
INFO: Skydio may recognize bushes, trees, and similar obstacles as potential surfaces. Pilot the drone to an open
area free of obstacles before initiating a landing. If a flight is initiated by taking o from a case (or a case is placed
at Skydio X2 exact take o point), GPS positional accuracy cannot be relied upon to guarantee a case landing when
using the Return to Home function (or in the case of a Return To Home triggered by lost communication).
Step 1 - Descend to 15 ft (4.6 m)
Step 2 - Select and hold Land
Skydio X2 will descend
below 10 ft (3 m) obstacle avoidance will be disabled for the remainder of the landing
during landing you may nudge the drone forward, backward, left, or right
yaw control is disabled during landing
cancel the landing by increasing altitude or selecting Cancel Landing
Land
Use the case for a landing pad to avoid disturbing dirt and debris:
Step 1 - Position the drone about 10 ft (3 m) above the case
Step 2 - Tilt the camera down so the case and Skydio logo are clearly in view
Step 3 - Select and hold Land
a yellow ring will circle the Skydio logo
if you do not see the yellow ring, cancel the landing and try again
Case landing
INFO: Skydio X2 may identify bushes, trees, and similar obstacles as potential surfaces. Pilot the drone to an open
area free of obstacles before initiating a landing. If a flight is initiated by taking o from a case (or a case is placed
at exact launch point), GPS positional accuracy cannot be relied upon to guarantee a case landing when using the
Return to Home function (or in the case of a Return To Home triggered by lost communication).
CAUTION: Piloting or nudging the vehicle during a case landing will cancel the case landing and continue with a
normal landing. Be careful not to accidentally touch the controller joysticks while X2 is performing a case landing.
When you are ready to land your drone, stop any subject tracking or autonomous actions and manually fly the drone
to a stable landing spot that is clear of debris and people.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Skydio X2 and is the answer not in the manual?

Skydio X2 Specifications

General IconGeneral
BrandSkydio
ModelX2
CategoryDrones
LanguageEnglish

Related product manuals