61
Skydio X2 Color/Thermal - Operator Manual © 2022 Skydio, Inc. All rights reserved.
Maintenance
The hard stops prevent the motor arms from over-extending when deployed.
Inspect all four hard stops to ensure they are free of damage and working properly. With motor arms extended and
viewing the drone head-on, X2 motor arms should be parallel to the chassis. If an arm is angled upward or downward
when fully extended, this is an indication that there is a broken hard stop and it should be replaced.
Replace hard stops
To replace your hard stops, you will need the T3 driver and replacement hard stops.
To Next Page
Loading...
