45
Skydio X2 Color/Thermal - Operator Manual © 2022 Skydio, Inc. All rights reserved.
Flight
Return to Home - set to either the launch location or
the controller location. If a Home Point has been set for
this flight, the Launch Point option will be replaced with
Home Point.
The Return Button on the Enterprise Controller
commands Skydio X2 to return to its launch location.
If you have set a Home Point on the map, pressing the
Return Button will command Skydio X2 to return to the
Home Point instead of the launch location.
Return to Home
Return height and behavior
Customize return behaviors in the Drone Settings menu:
Absolute return height - X2 will ascend to the specified
Return height (above the launch point) before returning
Relative return height - X2 will ascend by the specified
Return Height above the drone’s current position before
returning.
Drone Looks - X2 will either look toward or away from
the return destination
Return Type - set X2 to return using GPS or the vision
system. Set your return type to Vision in GPS-denied
environments.
Return Speed - set the speed of X2 while returning
Any time a return is triggered, either manually or autonomously, Skydio X2 will first ascend to a specified height
before returning. You can customize this return height, and other return settings, in the Drone Settings menu. Select
Return to Home, and ensure that no obstacles, people, or animals have moved into the return pathway. Skydio X2 will
retain the current obstacle avoidance setting while returning.
To Next Page
Loading...
Need help?
General
