Skyjack SJ12 User Manual

13
SJ12, SJ16 213721AAA
Maintenance responsibility Section 1 – About this Mobile Elevating Work Platform (MEWP)
1.4 Maintenance responsibility
1.4-1 Operator
Before the beginning of each shift, do all the daily
inspections and function tests. Refer to Section 4.
1.4-2 Maintenance and inspection
schedule
Refer to the service manual for frequent, periodic, and
annual inspections.
The actual operating environment of the MEWP may
affect the maintenance schedule.
IMPORTANT
Only use original or manufacturer-approved parts
and components for the MEWP.
NOTE
Refer to the Skyjack web site (www.skyjack.com) for
machine registration and the latest service bulletins
before you do frequent/periodic or annual inspections.
1.4-3 Owner
The owner is responsible for maintenance inspections
and repairs. Refer to the service manual for the
recommended maintenance and inspection areas and
intervals. Keep a record of the annual inspection on
the label on the mast assembly. Refer to Section 7.2 in
this manual.
WARNING
Only trained and qualied/competent personnel,
who understand the mechanical procedures, may
do maintenance on the MEWP. The use of a MEWP
that is not properly maintained or in the correct
working condition could result in death or serious
injury.

Skyjack SJ12 Specifications

General

Gradeability	25%
Drive Motor	24V DC
Machine Width	32 in (0.81 m)
Stowed Height	6.5 ft
Overall Width	32 in (0.81 m)
Stowed Height (Rails Folded)	6.5 ft
Drive Speed (Elevated)	0.5 mph (0.8 km/h)
Power Source	Electric